Setting Up Swagger 2 with a Spring REST API
Last modified: April 9, 2017
1. Overview
1. Overview
When creating a REST API, good documentation is instrumental.
Moreover, every change in the API should be simultaneously described in the reference documentation. Accomplishing this manually is a tedious exercise, so automation of the process was inevitable.
In this tutorial, we will look at Swagger 2 for a Spring REST web service. For this article, we will use the Springfox implementation of the Swagger 2 specification.
If you are not familiar with Swagger, you should visit its web page to learn more before continuing with this article.
2. Target Project
The creation of the REST service we will use in our examples is not within the scope of this article. If you already have a suitable project, use it. If not, the following links are a good place to start:
3. Adding the Maven Dependency
As mentioned above, we will use the Springfox implementation of the Swagger specification.
To add it to our Maven project, we need a dependency in the pom.xml file.
1
2
3
4
5
| <dependency> <groupId>io.springfox</groupId> <artifactId>springfox-swagger2</artifactId> <version>2.6.1</version></dependency> |
4. Integrating Swagger 2 into the Project
4.1. Java Configuration
The configuration of Swagger mainly centers around the Docket bean.
1
2
3
4
5
6
7
8
9
10
11
12
| @Configuration@EnableSwagger2public class SwaggerConfig { @Bean public Docket api() { return new Docket(DocumentationType.SWAGGER_2) .select() .apis(RequestHandlerSelectors.any()) .paths(PathSelectors.any()) .build(); }} |
Swagger 2 is enabled through the @EnableSwagger2 annotation.
After the Docket bean is defined, its select() method returns an instance of ApiSelectorBuilder, which provides a way to control the endpoints exposed by Swagger.
Predicates for selection of RequestHandlers can be configured with the help of RequestHandlerSelectors and PathSelectors. Using any() for both will make documentation for your entire API available through Swagger.
This configuration is enough to integrate Swagger 2 into existing Spring Boot project. For other Spring projects, some additional tuning is required.
4.2. Configuration Without Spring Boot
Without Spring Boot, you don’t have the luxury of auto-configuration of your resource handlers. Swagger UI adds a set of resources which you must configure as part of a class that extends WebMvcConfigurerAdapter, and is annotated with @EnableWebMvc.
1
2
3
4
5
6
7
8
| @Overridepublic void addResourceHandlers(ResourceHandlerRegistry registry) { registry.addResourceHandler("swagger-ui.html") .addResourceLocations("classpath:/META-INF/resources/"); registry.addResourceHandler("/webjars/**") .addResourceLocations("classpath:/META-INF/resources/webjars/");} |
4.3. Verification
To verify that Springfox is working, you can visit the following URL in your browser:
http://localhost:8080/spring-security-rest/api/v2/api-docs
The result is a JSON response with a large number of key-value pairs, which is not very human-readable. Fortunately, Swagger provides Swagger UI for this purpose.
5. Swagger UI
Swagger UI is a built-in solution which makes user interaction with the Swagger-generated API documentation much easier.
5.1. Enabling Springfox’s Swagger UI
To use Swagger UI, one additional Maven dependency is required:
1
2
3
4
5
| <dependency> <groupId>io.springfox</groupId> <artifactId>springfox-swagger-ui</artifactId> <version>2.4.0</version></dependency> |
Now you can test it in your browser by visiting http://localhost:8080/your-app-root/swagger-ui.html
In our case, by the way, the exact URL will be: http://localhost:8080/spring-security-rest/api/swagger-ui.html
The result should look something like this:
5.2. Exploring Swagger Documentation
Within Swagger’s response is a list of all controllers defined in your application. Clicking on any of them will list the valid HTTP methods (DELETE, GET, HEAD, OPTIONS, PATCH, POST, PUT).
Expanding each method provides additional useful data, such as response status, content-type, and a list of parameters. It is also possible to try each method using the UI.
Swagger’s ability to be synchronized with your code base is crucial. To demonstrate this, you can add a new controller to your application.
1
2
3
4
5
6
7
8
| @RestControllerpublic class CustomController { @RequestMapping(value = "/custom", method = RequestMethod.POST) public String custom() { return "custom"; }} |
Now, if you refresh the Swagger documentation, you will see custom-controller in the list of controllers. As you know, there is only one method (POST) shown in Swagger’s response.
6. Advanced Configuration
The Docket bean of your application can be configured to give you more control over the API documentation generation process.
6.1. Filtering API for Swagger’s Response
It is not always desirable to expose the documentation for your entire API. You can restrict Swagger’s response by passing parameters to the apis() and paths() methods of the Docketclass.
As seen above, RequestHandlerSelectors allows using the any or none predicates, but can also be used to filter the API according to the base package, class annotation, and method annotations.
PathSelectors provides additional filtering with predicates which scan the request paths of your application. You can use any(), none(), regex(), or ant().
In the example below, we will instruct Swagger to include only controllers from a particular package, with specific paths, using the ant() predicate.
1
2
3
4
5
6
7
8
| @Beanpublic Docket api() { return new Docket(DocumentationType.SWAGGER_2) .select() .apis(RequestHandlerSelectors.basePackage("org.baeldung.web.controller")) .paths(PathSelectors.ant("/foos/*")) .build();} |
6.2. Custom Information
Swagger also provides some default values in its response which you can customize, such as “Api Documentation”, “Created by Contact Email”, “Apache 2.0”.
To change these values, you can use the apiInfo(ApiInfo apiInfo) method. The ApiInfo class that contains custom information about the API.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
| @Beanpublic Docket api() { return new Docket(DocumentationType.SWAGGER_2) .select() .apis(RequestHandlerSelectors.basePackage("com.example.controller")) .paths(PathSelectors.ant("/foos/*")) .build() .apiInfo(apiInfo());}private ApiInfo apiInfo() { ApiInfo apiInfo = new ApiInfo( "My REST API", "Some custom description of API.", "API TOS", "Terms of service", "myeaddress@company.com", "License of API", "API license URL"); return apiInfo;} |
6.3. Custom Methods Response Messages
Swagger allows globally overriding response messages of HTTP methodsthrough Docket’s globalResponseMessage() method. First, you must instruct Swagger not to use default response messages.
Suppose you wish to override 500 and 403 response messages for all GET methods. To achieve this, some code must be added to the Docket’s initialization block (original code is excluded for clarity):
1
2
3
4
5
6
7
8
9
10
11
| .useDefaultResponseMessages(false) .globalResponseMessage(RequestMethod.GET, newArrayList(new ResponseMessageBuilder() .code(500) .message("500 message") .responseModel(new ModelRef("Error")) .build(), new ResponseMessageBuilder() .code(403) .message("Forbidden!") .build())); |
7. Conclusion
In this tutorial, we set up Swagger 2 to generate documentation for a Spring REST API. We also have explored ways to visualize and customize Swagger’s output.
The full implementation of this tutorial can be found in the GitHub project – this is an Eclipse based project, so it should be easy to import and run as it is.
+ swagger resources를 registry에 등록하는 config를 연결하는 servlet config 부분에 Swagger.class도 함께 등록하여야 사용가능하다.
ref)
http://www.baeldung.com/swagger-2-documentation-for-spring-rest-api
댓글 없음:
댓글 쓰기